[Ghosthouse]

One small follow-up: repeat the test from a cold start once. Heat can hide or create a fault, and “it worked five minutes later” is useful information.

[Ghosthouse]

yeah exactly the valve becomes the little martyr in this whole setup and nobody thanks it

[Ghosthouse]

I had a similar issue but not the same revision. Mine ended up being embarrassingly simple, so I would keep the easy checks alive until the evidence kills them.

[Ghosthouse]

Not the exact revision, but I had a closely related setup with the same general failure mode. The thing that saved time was separating the Niche Zero / puck-prep side from the machine side instead of adjusting both together. Similar experience, not proof for your unit.

[Author]

Posts