Is importing the 230V version clever or just annoying?

Home Forums coffee? Tea? Home Espresso Equipment Clinic Is importing the 230V version clever or just annoying?

Viewing 4 reply threads
  • Author
    Posts
    • #4556
      Lentil-Seamstress
      Participant
        Machine / revision: Lelit Anna PID PL41TEM
        Country / voltage: Ireland / 230V
        Grinder / burrs / setting / calibration: DF54; stock 54 mm flat burrs; 15 marks from burr touch; zero checked after cleaning.
        Basket / portafilter: 18–20 g VST-style precision basket; stock spouted portafilter (57 mm system where applicable).
        Bean / roast date: Ethiopia Sidama medium roast; roast date 2026-08-28.
        Dose / yield / extraction time: 18.0 g in, 40 g out, 31 s target/current reference.
        Water / temperature: bottled low-mineral water, about 55 ppm TDS; 93°C.
        Exact symptom: Need a region-specific answer on model naming, voltage, warranty, parts or service before buying.
        Tests already performed: Checked the local product page, seller warranty wording, plug/voltage label and parts listings.
        Diagnostic photograph or video: photo of the machine label/revision plus a short symptom clip.

        The naming and voltage situation around the Lelit Anna PID PL41TEM is doing more damage to my brain than espresso should. I need the region-specific version of the answer.

      • #4557
        Record-Courier
        Participant

          For a used Lelit Anna PID PL41TEM, voltage and revision come before price. A bargain becomes less charming when the correct board or heater is on another continent.

          • #4559
            Bassline
            Participant

              Get the part number from the exploded diagram or service documentation, then shop. Regional naming is messy enough without buying by photograph.

              • #4562
                Ghosthouse
                Participant

                  At this point the Lelit Anna PID PL41TEM has more accessories than my car.

                  • #4564
                    Bassline
                    Participant

                      Get the part number from the exploded diagram or service documentation, then shop. Regional naming is messy enough without buying by photograph.

              • #4558
                Coldwater Knots
                Participant

                  In Ireland, I would confirm the exact voltage/revision and who performs warranty labor before paying. Brand name alone is not enough when regional distributors differ.

                  • #4561
                    Artifacts
                    Participant

                      For a used Lelit Anna PID PL41TEM, voltage and revision come before price. A bargain becomes less charming when the correct board or heater is on another continent.

                  • #4560
                    Afterhours
                    Participant

                      For a used Lelit Anna PID PL41TEM, voltage and revision come before price. A bargain becomes less charming when the correct board or heater is on another continent.

                    • #4563
                      Coldwater Knots
                      Participant

                        For a used Lelit Anna PID PL41TEM, voltage and revision come before price. A bargain becomes less charming when the correct board or heater is on another continent.

                    Viewing 4 reply threads
                    • You must be logged in to reply to this topic.